We perform testing by UOP 163 to determine the hydrogen sulfide and mercaptan sulfur content in hydrocarbons by potentiometric titration. This method can be used for gasoline, naphtha, light cycle oils and similar hydrocarbons.  We also perform sulfur analysis by ASTM D129, ASTM D2622, ASTM D3227, ASTM D4294, ASTM D5623, ASTM D5453, ASTM D7039, IP 61, IP 342, and ISO 3012. These different test methods […]

We perform petroleum quality and conformance testing by NACE TM-01-72 to evaluate the corrosive properties of petroleum products transported in pipelines. Petroleum product pipelines are subject to general surface corrosion caused by traces of moisture condensed from the products. Rusting can be prevented with corrosion inhibitors. Sample quantity required: 200 ml Contact […]

We perform testing by SAE ARP6179 to evaluate the compatibility of elastomer O-rings used in gas turbine engines with lubricants and reference fluids. This test method provides procedures for exposing specimens of elastomer materials (AS 568-214 size O-rings) representative of those used in gas turbine engines to lubricants or reference fluids under defined […]

We perform HLPS testing to evaluate the coking propensity of aviation lubricants under single phase flow conditions found in parts of gas turbine engines. A lubricant’s tendency to form deposits in an engine oil system is a critical factor that can influence engine design, engine performance, and maintenance intervals. This method […]

We perform hydraulic fluid quality testing by FTM 3012 to determine whether aerospace hydraulic fluids meet the NAS 1638 cleanliness standard. NAS 1638 is not a test method, but is a cleanliness standard for hydraulic fluids used in aviation applications.  It is widely used in industrial and aerospace applications. The particle count is determined […]

We perform lubricants testing by military specification MIL-PRF-8188, which covers a corrosion-preventive oil. This military specification covers the requirements for one type of corrosion-preventive oil intended for preservation of specific models of aircraft turbine engines, helicopter transmissions, accessory and auxiliary power units, and other types of equipment which require a synthetic […]

We perform lubricants testing by military specification MIL-PRF-7024, which covers three types of calibrating fluid used in aircraft fuel system components. The following is a list of tests required by Specification MIL-PRF-7024F. Some of these tests are customized for this exact specification. We specialize in unusual and custom testing, and our testing […]

We perform testing by military specification MIL-PRF-680, which covers solvents made with petroleum distillates and used for degreasing machine parts for. These degreasing solvents consist of five types of petroleum distillates.  The following is a list of tests required by Specification MIL-PRF-680C. Some of these tests are customized for this exact specification. […]

We perform lubricants testing by military specification MIL-PRF-5606, which covers hydraulic fluid used in automatic pilots, brakes, and other systems. This military specification describes the characteristics and provides the requirements for a petroleum base hydraulic fluid for use in the -54C to +135C temperature range. The hydraulic fluid covered by this […]

We perform quality and conformance testing by Military Specification MIL-PRF-23827, which covers a low-temperature grease used on aircraft and instruments. This lubricating grease is identified by NATO G-354. This grease is intended for use in ball, roller and needle bearings, gears, and on sliding and rolling surfaces of equipment such […]