Hydrocarbon Laboratory Capabilities

Explore our comprehensive range of tests designed to empower you with valuable insights.

Contact us today

Natural Gas

  • GPA 2261 – ANALYSIS FOR NATURAL GAS AND SIMILAR GASEOUS MIXTURES N2, CO2, C1 – C6+, BTU, RELATIVE DENSITY
  • GPA 2261 – ANALYSIS FOR NATURAL GAS AND SIMILAR GASEOUS MIXTURES N2, CO2, C1 – C7+, BTU, RELATIVE DENSITY
  • GPA 2286
  • ASTM D3588 – CALCULATION HIGHER & LOWER HEATING VALUE
  • EOS – CALCULATED HYDROCARBON DEW POINT, EQUATION OF STATE (EOS, PROSIM)
  • D6667 – TOTAL SULFUR
  • GPA 2199/ASTM D5504 – SULFUR SPECIATION IN NATURAL GAS
  • ASTM D7423M – METHANOL IN NATURAL GAS
  • ASTM D6350 – MERCURY IN NATURAL GAS

Refinery Gas Testing

  • ASTM D1946 – REFINERY ANALYSIS (TCD/FID) HHV, LHV SPECIFIC GRAVITY H2-CO & C1-C6+
  • ASTM D1946 – LIGHT HYDROCARBONS (TCD) H2, CO2, O2, N2, CO, C1, C2 (ETHANE), C2= (ETHYLENE), C2º (ACETYLENE)
  • ASTM D1946 – HYDROCARBONS (FID) –ALKANES: C6+, C1, C2, C3, IC4, NC4, IC5, NC5; – OLEFINS: C2=, C3=, C4=1, IC4=, TC4=2, CC=2 / DIOLEFINS: PROPADIENE, 1,3-BUTADIENE
  • ASTM D1946/GPA2286 – EXTENDED REFINERY ANALYSIS (TCD/FID) H2 – CO & C1 – C14

Natural Gas Liquid Testing

  • GPA 2177 – ANALYSIS FOR NATURAL LIQUIDS N2, CO2, C1 – C6+
  • GPA 2177 – ANALYSIS FOR NATURAL LIQUIDS N2, CO2, C1 – C7+
  • GPA 2286 – EXTENDED ANALYSIS FOR NATURAL LIQUIDS N2, CO2, C1 – C10+
  • ASTM D7423 – DETERMINATION OF OXYGENATES BY GCFID
  • ASTM D7994 – TOTAL FLUORINE, CHLORINE, AND SULFUR BY CIC – D7994
  • ASTM D7995 – TOTAL WATER IN LIQUID BUTANE BY LIQUIFIED GAS SAMPLER AND COULOMETRIC KF
  • ASTM D6897 – VAPOR PRESSURE OF LIQUIFIED PETROLEUM GASSES (LPG)
  • GPA 2199/ ASTM D5623 – SULFUR SPECIATION IN LIGHT PETROLEUM LIQUIDS

Crude Oil Testing

  • GPA 2103 – ANALYSIS OF CRUDE AND NATURAL GAS CONDENSATE MIXTURES N2, CO2, C1 – C6+, LIQUID
  • GPA 2103M – ANALYSIS OF CRUDE AND NATURAL GAS CONDENSATE MIXTURES N2, CO2, C1 – C7+, LIQUID
  • GPA 2103M – EXTENDED ANALYSIS OF CRUDE AND NATURAL GAS CONDENSATE MIXTURES N2, CO2, C1 – C10+, INCLUDES: BTEX
  • GPA 2103M – EXTENDED ANALYSIS OF CRUDE AND NATURAL GAS CONDENSATE MIXTURES CONTAINING NITROGEN AND CARBON DIOXIDE BY GAS CHROMATOGRAPHY N2, CO2, C1 – C10+C30, INCLUDES: BTEX
  • FLASH LIBERATION – Physical flash liberation – Gas to Oil Ratio (GOR) is the process of separating a single-phase fluid into two phases (gas and oil) to evaluate the physical properties and composition of the individual phases at standard conditions.
  • SHRINK/FLASH – PHYSICAL SHRINKAGE/FLASH FACTOR –REFERENCE: API -PROPRIETARY

GENERAL ANALYSIS & TESTS

  • ASTM D664 – ACID NUMBER, POTENTIOMETRIC
  • ASTM APB/SPL – ACID PRODUCING BACTERIA –PROPRIETARY METHOD
  • ASTM ALKALI/SPL – ALKALINITY OF AMINES OR MINERAL ACIDITY –PROPRIETARY METHOD
  • ASTM D611.A – ANILINE POINT
  • ASTM D1319 – AROMATICS, OLEFINS AND SATURATES (FIA)
  • ASTM D482 – ASH CONTENT
  • ASTM D3279 – ASPHALTENES (NHEPTANE INSOLUBLES) 
  • ASTM E659 – AUTO IGNITION
  • AUTO IGNITION – BACTERIA IN PETROLEUM PRODUCTS (CULTURE TEST) 
  • ASTM D86 – BOILING POINT
  • ASTM D240 – B.T.U. OF GASOLINE, FUEL OIL & JET FUEL
  • ASTM D2854 – BULK DENSITY
  • ASTM D187 – BURNING QUALITY
  • ASTM D5291-CHN – CARBON, HYDROGEN, NITROGEN (C, H, N)
  • ASTM D5291-CHNO – CARBON, HYDROGEN, NITROGEN, OXYGEN (C, H, N, O, BY DIFFERENCE)
  • CHR/SPL – CARBON HYDROGEN RATIO
  • ASTM D189 – CARBON RESIDUE (CONRADSON)
  • ASTM D524 – CARBON RESIDUE RAMSBOTTOM (CALCULATED FROM ASTM D189)
  • ASTM D976 – CETANE INDEX (CALCULATED D 86 50% B.P./API GRAVITY)
  • OS-D-613-CL CETANE NUMBER
  • ASTM D512 – CHLORIDE, INORGANIC
  • ASTM D4929 – CHLORIDE CONTENT, ORGANIC  -CONTENT DETERMINATION IN CRUDE OIL
  • OS-D-808-TOL – CHLORINE (TOTAL HALOGENS) IN NEW AND USED OILS, BOMB METHOD
  • ASTM D2500 – CLOUD POINT
  • ASTM CO2/UIC – CO2 IN GAS TREATING AMINES (UIC METHOD)
  • ASTM D1500 – COLOR (ASTM)
  • ASTM D156 – COLOR (SAYBOLT)
  • ASTM D4740 – COMPATIBILITY OF FUEL OILS
  • ASTM D130 – CORROSION (COPPER STRIP) 
  • ASTM D1838 – CORROSION, LPG (COPPER STRIP)
  • ASTM D4052 – DENSITY –API GRAVITY/RELATIVE DENSITY (DENSITY METER)
  • ASTM D5002 – DENSITY –DENSITY & RELATIVE DENSITY OF CRUDE
  • ASTM D5002M – DENSITY, FLOWING (PRESSURIZED LIQUIDS)
  • ASTM D287 – DENSITY –GRAVITY, API HYDROMETER
  • ASTM D1298 – DENSITY –DENSITY/SPECIFIC GRAVITY BY HYDROMETER
  • ASTM D6377 – STANDARD TEST METHOD FOR DETERMINATION OF VAPOR PRESSURE OF CRUDE OIL: VPCRX  (EXPANSION METHOD)
  • ASTM D877 – DIELECTRIC STRENGTH (KV)
  • ASTM D86 – DISTILLATION –ATMOSPHERIC *
  • ASTM D850 – DISTILLATION –INDUSTRIAL AROMATICS *
  • ASTM D1160 – DISTILLATION –REDUCED PRESSURE *
  • ASTM D2887 – BOILING RANGE DISTRIBUTION OF PETROLEUM FRACTIONS BY GAS CHROMATOGRAPHY
  • ASTM D7169 – BOILING POINT DISTRIBUTION OF CRUDE OIL AND VALCUUM RESIDUES BY GC
  • HTSD-CN/SPL – HIGH TEMPERATURE SIMULATED DISTILLATION(HTSD) WITH INITIAL BOILING POINT >100°F AND FINAL BOILING POINT OF 1400°F. 
  • OS-HTSD-CN/TRI – HIGH TEMPERATURE SIMULATED DISTILLATION(HTSD) WITH INITIAL BOILING POINT>100°F AND FINAL BOILING POINT OF 1400°F.
  • ASTM D2892/AP-RT-550 – DISTILLATION, TRUE BOILING POINT *  ATMOSPHERIC PRESSURE, ROOM TEMPERATURE UP TO 550°F 
  • ASTM D2892/CO-FR-1050 DISTILLATION, TRUE BOILING POINT *CRUDE OIL, FULL RANGE TO 1050°F. INCLUDES ATMOSPHERIC TO 550°F AND REDUCED PRESSURE FROM 550°F TO 1050°F
  • ASTM D2892/RP-550-1050 – DISTILLATION, TRUE BOILING POINT *  REDUCED PRESSURE, 550°F TO 1050°F
  • UOP 41 – DOCTOR TEST
  • ASTM D127 – DROP MELTING POINT
  • ASTM D1401 – EMULSION CHARACTERISTICS
  • ASTM EVABUT/SPL – EVAPORATION RATE (BUTYL ACETATE = 1) J-M –PROPRIETARY METHOD
  • ASTM D92 – FLASH POINTS –CLEVELAND OPEN CUP
  • ASTM D93.A – FLASH POINTS –PENSKY-MARTENS – PROCEDURE A 
  • ASTM D93.B – FLASH POINTS –PENSKY-MARTENS – PROCEDURE B
  • ASTM D56 – FLASH POINTS –TAG CLOSED CUP
  • ASTM D1310 – FLASH POINTS –TAG OPEN CUP
  • ASTM D2386 – FREEZING POINT OF AVIATION FUELS
  • ASTM GLYSTK – GLYCOL IN MOTOR OIL BY GLYSTICK – PROPRIETARY METHOD
  • ASTM D4810 – H2S (STAINED TUBE – SENSIDYNE) – FIELD TEST (REQUIRES TRAVEL)
  • UOP 163 – H2S AND MERCAPTANS IN LIQUIDS
  • UOP 9-85 – H2S IN GASES BY TUWILER METHOD (FIELD METHOD)
  • PROPRIETARY – TOTAL HYDROCARBONS IN GLYCOL BY  EXTRACTIONS
  • ASTM D1331-B – INTERFACIAL TENSION (RING METHOD)
  • ASTM D1133 – KAURI-BUTANOL VALUE
  • OS-D-3237-TOL – LEAD IN GASOLINE BY AA
  • ASTM D5705M – MEASUREMENT OF HYDROGEN SULFIDE IN THE VAPOR PHASE
  • ASTM D87 – MELTING POINT OF PETROLEUM WAX
  • ASTM D2974 – MOISTURE, ASH AND ORGANIC MATTER
  • MOLWT-CC – MOLECULAR WEIGHT (CRYOSCOPIC CRYETTE)
  • ASTM D4629 – NITROGEN, CHEMILUMINESCENCE
  • ASTM D5762 – NITROGEN, IN PETROLEUM BY BOAT-INLET CHEMILUMINESCENCE
  • ASTM D3228 – NITROGEN, KJELDAHL
  • OS-D-2699-CL – OCTANE DETERMINATION, RESEARCH
  • OS-D-2700-CL – OCTANE DETERMINATION, MOTOR
  • ASTM D525 – OXIDATION STABILITY OF FUEL OILS
  • OS-D-2272 – OXIDATION STABILITY OF STEAM TURBINE OILS BY ROTATING PRESSURE VESSEL
  • UOP 46 – PARAFFIN WAX CONTENT IN OIL 
  • ASTM D4059 – PCB IN TRANSFORMER OIL
  • ASTM D893 – PENTANE AND BENZENE INSOLUBLE IN USED LUBE OIL
  • ASTM PHHYD – PH VALUE –HYDROCARBONS, PH METER
  • ASTM D97 – POUR POINT
  • ASTM D1218 – REFRACTIVE INDEX (4 PLACES)
  • ASTM D2158 – RESIDUE ON EVAPORATION (WEATHERING TEST ON LPG)
  • ASTM D3230 – SALT CONTENT, CRUDE OIL –LBS./1000 BBLS.
  • ASTM D4007 – SEDIMENT AND WATER IN CRUDE BY CENTRIFUGE
  • ASTM D1796 – SEDIMENT AND WATER IN FUEL OILS BY CENTRIFUGE
  • ASTM D473 – SEDIMENT BY EXTRACTION IN CRUDE/FUEL OILS
  • ASTM D4807 – SEDIMENT BY FILTRATION (MILLIPORE)
  • ASTM SHRINK/FLASH – PHYSICAL SHRINKAGE/FLASH FACTOR –REFERENCE: API –PROPRIETARY METHOD
  • ASTM D1322 – SMOKE POINT –KEROSENE OR AVIATION FUEL
  • ASTM SOLH2O/SPL – SOLUBILITY IN WATER
  • ASTM SOX-EXTRACT – SOXHLET EXTRACTION
  • SUGNOG/SPL – SUGAR IN OIL OR GASOLINE (QUALITATIVE)
  • OS-D-129-TOL – SULFUR –BOMB METHOD
  • UOP 163 – SULFUR –H2S AND MERCAPTANS, LIQUID
  • ASTM D4294 – SULFUR –WEIGHT % IN SOLIDS AND LIQUIDS (X-RAY FLUORESCENCE)
  • ASTM D6667 – SULFUR –IN LPG & NATURAL GAS BY UVF
  • ASTM D5453 – SULFUR –LIGHT HYDROCARBON LIQUIDS BY UVF
  • ASTM BIPP/SPL – SULFUR REDUCING BACTERIA
  • ASTM D1331-A – SURFACE TENSION (RING METHOD A)
  • ASTM D1331-B – INTERFACIAL TENSION (RING METHOD B)
  • ASTM D5191 – VAPOR PRESSURE –GRABNER
  • ASTM D323 – VAPOR PRESSURE –REID METHOD
  • ASTM D4953 – VAPOR PRESSURE –GASOLINE (REID DRY METHOD)
  • ASTM D1267 – VAPOR PRESSURE –LPG
  • ASTM D6377 -STANDARD TEST METHOD FOR DETERMINATION OF VAPOR PRESSURE OF CRUDE OIL: VPCRX  (EXPANSION METHOD)
  • ASTM D2983 – VISCOSITY –BROOKFIELD – PER TEMPERATURE
  • ASTM D445 – VISCOSITY –KINEMATIC – 104°F OR 212°F
  • ASTM D445 – VISCOSITY –KINEMATIC – AT ANY OTHER TEMPERATURE
  • VIS-SAYFUR – VISCOSITY –SAYBOLT FUROL (CALCULATED FROM D 445)
  • ASTM D2270 – VISCOSITY –INDEX (CALCULATED FROM TEST)
  • ASTM D1837 – VOLATILITY OF LPG
  • MINPAT – WATER ANALYSIS –OIL FIELD MINERAL PATTERN (STIFF/DAVIS PLOT)
  • ASTM D4006 – WATER CONTENT –BY DISTILLATION IN CRUDE
  • ASTM D95 – WATER CONTENT –BY DISTILLATION IN PETROLEUM PRODUCT
  • ASTM D4928 – WATER CONTENT –KARL FISHER (COULOMETRIC)
  • ASTM D4377 – WATER CONTENT –KARL FISHER (VOLUMETRIC)
Request a quote

Didn’t find the test you were looking for?

Reach out! We cover a wide range of capabilities through our large network of laboratories.

Contact us today